JIANGSU HAOHUA INDUSTRY GROUP
Tel: +86-512-58220050
Fax: +86-512-58810865
E-mail: sales@haopipe.com
MSN: haopipe@hotmail.com
Skype: haopipe
Other common names: Alloy 825
Incoloy 825 is a nickel-iron-chromium alloy with additions of molybdenum and copper. This nickel steel alloy’s chemical composition is designed to provide exceptional resistance to many corrosive environments. It is similar to alloy 800 but has improved resistance to aqueous corrosion. It has excellent resistance to both reducing and oxidizing acids, to stress-corrosion cracking, and to localized attack such as pitting and crevice corrosion. Alloy 825 is especially resistant to sulfuric and phosphoric acids. This nickel steel alloy is used for chemical processing, pollution-control equipment, oil and gas well piping, nuclear fuel reprocessing, acid production, and pickling equipment.
In what forms is Incoloy 825 available ?
Sheet
Plate
Bar
Pipe & Tube (welded & seamless)
Fittings (i.e. flanges, slip-ons, blinds, weld-necks, lapjoints, long welding necks, socket welds, elbows, tees, stub-ends, returns, caps, crosses, reducers, and pipe nipples)
Wire
What are the characteristics of Incoloy 825?
Excellent resistance to reducing and oxidizing acids
Good resistance to stress-corrosion cracking
Satisfactory resistance to localized attack like pitting and crevice corrosion
Very resistant to sulfuric and phosphoric acids
Good mechanical properties at both room and elevated temperatures up to approximately 1020° F
Permission for pressure-vessel use at wall temperatures up to 800°F
Alloy 825 (UNS N08825) Chemical Composition, %
Ni | Fe | Cr | Mb | Cu | Ti | C | Mn | S | Si | Al |
---|---|---|---|---|---|---|---|---|---|---|
38.0-46.0 | 22.0 min | 19.5-23.5 | 2.5-3.5 | 1.5-3.0 | .6-1.2 | 0.05 max | 1.0 max | 0.03 max | 0.5 max | 0.2 max |
Corrosion Resistance
Alloy 825 has a high level of corrosion resistance. It resists general corrosion, pitting, crevice corrosion, intergranular corrosion, and stress-corrosion cracking in both reducing and oxidizing environments.
In what applications is Incoloy 825 used?
Chemical Processing
Pollution-control
Oil and gas well piping
Nuclear fuel reprocessing
Components in Pickling equipment like heating coils, tanks, baskets and chains
Acid production
ASTM Specifications
Pipe Smls | Pipe Welded | Tube Smls | Tube Welded | Sheet/Plate | Bar | Forging | Fitting |
---|---|---|---|---|---|---|---|
B423 | B424 | B425 | B564 | B366, B564 |
General Mechanical Properties
Tensile (ksi) | .2% Yield (ksi) |
---|---|
85 | 30-35 |
Alloy 825 has good mechanical properties from cryogenic temperatures to moderately high temperatures. However, exposure to temperatures above 1000° F can result in microstructural changes that significantly lower ductility and impact strength. Alloy 825 should not be used at temperatures where creep-rupture properties are design factors.
*Note: The specifications noted including ASTM, ASME, or other applicable authorities are correct at the time of publication. Other specifications may apply for use of these materials in different applications.
Friendly link:
Stainless coils tubing |
Titanium Alloy steel pipes |
U tubes |
Finned tubes |
Ferritic Stainless Steel Pipes |
Duplex Stainless steel pipes |
Austenitic stainless steel pipes |
Nickel Alloy steel pipes |
JIANGSU HAOHUA INDUSTRY GROUP Tel: 0086-512-58220050 Fax:0086-512-58810865 E-mail: sales@haopipe.com Add: No.17,Southeastern Avenue, Economic Development Zone (South Area),Zhangjiagang City, Jiangsu Province, China. |