JIANGSU HAOHUA INDUSTRY GROUP
Tel: +86-512-58220050
Fax: +86-512-58810865
E-mail: sales@haopipe.com
MSN: haopipe@hotmail.com
Skype: haopipe
Sizes | Standard Tolerances | ||||||
---|---|---|---|---|---|---|---|
Products | OD | Wall | Lengths and/or coils | Grades | OD | Wall | Lengths |
Welded Austenitic Steel Boiler, Super Heater, Heat-Exchangers & Condenser Tubes
Specifications: ASTM-A249, ASME-SA249, ASTM-A688, ASME-SA688 |
3/16" (4.76 mm) to 4" (101.6 mm)
Metric sizes available |
0.020" (0.51 mm) to 0.220" (5.59 mm) | Random or cut lengths up to 90' (27.4 m) Coils to 1-1/2" OD | 304/304L/304LN/304H |
Under 1" (25.4 mm) ±0.004" (0.10 mm) 1" (25.4 mm) to
1-1/2" (38.1 mm) ±0.006" (0.15 mm)
>1-1/2" (38.1 mm) to 2" (50.8 mm) ±0.008" (0.20 mm)
>2" (50.8 mm) to 2-1/2" (63.5 mm) ±0.010" (0.25 mm)
>2-1/2" (63.5 mm) to 3" (76.2 mm) ±0.012" (0.30 mm)
3" (76.2 mm) to 4" (101.6 mm) ±0.015" (0.38 mm)
|
±10% | Randoms up to +2" (50.8 mm) Cuts +1/8" (3 mm) -0" Coils to 80,000' (24,384 m) |
Pressure & Corrosion Tubing
Meets or exceeds requirements for welded Specifications: ASTM-A269, ASTM-A1016, and ASTM-A632 |
1/16" (1.59 mm) to 4" (101.6 mm)
Metric sizes available |
0.010" (0.25 mm) to 0.220" (5.59 mm) | Random or cut lengths up to 90' (27.4 m) Coils to 1-1/2" OD | 304/304L/304H |
<1-1/2" (38.1 mm) ±0.005" (0.13 mm) 1-1/2" (38.1 mm) to 3" (76.2 mm) ±0.010" (0.25 mm)
3-1/2" (88.9 mm) to 4" (101.6 mm) ±0.015" (0.38 mm)
|
±10% | Randoms up to +2" (50.8 mm) Cuts +1/8" (3 mm) -0" Coils to 80,000' (24,384 m) |
Beverage Tubing | 1/4"(6.35 mm) 5/16" (7.94 mm) 3/8" (9.53 mm) 1/2" (12.7 mm)
Metric sizes available |
0.020" (0.51 mm) to 0.028" (0.71 mm) | Random or cut lengths up to 40' (12.2 m) | 304/304L/304H | ±0.005" (0.13 mm) | ±10% | Randoms up to +2" (50.8 mm) Cuts +1/8" (3 mm) -0" Coils to 15,000' (4,572 m) |
Instrumentation Tubing Specifications: ASTM-A269 and ASTM-A632 |
1/16" (1.59 mm) to 1/2" (12.7 mm)
Metric sizes available |
0.010" (0.25 mm) to 0.065" (1.65 mm) | Random or cut lengths up to 40' (12.2 m) | 304/304L/304H | ±0.005" (0.13 mm) | ±10% | Randoms up to +2" (50.8 mm) Cuts +1/8" (3 mm) -0" |
Food/Dairy Tubing, Pharmaceutical/ BioPharmaceutical Tubing, High Purity Tubing, Ultra High Purity Tubing | 1/2" (12.7 mm) to 8" (203.2 mm) | 0.049" (1.24 mm) to 0.109" (2.77 mm) | 20' (6.1 m) stock lengths. Other lengths available upon request. | 304/304L |
1/2" (12.7 mm) ±0.005" (0.13 mm)
3/4" (19.1 mm) ±0.005" (0.13 mm)
1" (25.4 mm) ±0.005" (0.13 mm)
1-1/2" (38.1 mm) ±0.008" (0.20 mm)
2" (50.8 mm) ±0.008" (0.20 mm)
2-1/2" (63.5 mm) ±0.010" (0.25 mm)
3" (76.2 mm) ±0.010" (0.25 mm)
4" (101.6 mm) ±0.015" (0.38 mm)
6" (152.4 mm) ±0.030" (0.76 mm)
8" (203.2 mm) +0.061" (1.55 mm), -0.031" (0.79 mm)
|
±10%
±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% |
+1/8" (3 mm) -0"
+1/8" (3 mm) -0" +1/8" (3 mm) -0" +1/8" (3 mm) -0" +1/8" (3 mm) -0" +1/8" (3 mm) -0" +1/8" (3 mm) -0" +1/8" (3 mm) -0" +1" (25.4 mm) -0" +1" (25.4 mm) -0" |
Tensile Strength | Yield Strength | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Alloy | UNS Designation | Spec. | psi | MPa | ksi | psi | MPa | ksi | Elongation in 2 inches (min.) % | Grain Size Req. | Max. Hardness | Modulus of Elasticity (x106psi) | Mean Coefficient of Thermal Expansion (IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) |
304 | S30400 | A249, A312 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | — | 90 Rb | 28.0 | 9.2 | 116 |
304L | S30403 | A270 A312 | 70,000 | 485 | 70 | 25,000 | 170 | 25 | 35 | — | 90 Rb | 28.0 | 9.2 | 116 |
304LN | S30453 | A249, A688 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | — | 90 Rb | 28.0 | 9.2 | 116 |
304H | A30409 | A249, A312 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | 7 or coarser | 90 Rb | 28.0 | 9.2 | 116 |
Grade | 304 | 304L | 304LN | 304H |
---|---|---|---|---|
UNS Designation | S30400 | S30403 | S30453 | S30409 |
Carbon (C) Max. | 0.08 | 0.030* | 0.030 | 0.04 – 0.10 |
Manganese (Mn) Max. | 2.00 | 2.00 | 2.00 | 2.00 |
Phosphorous (P) Max. | 0.045 | 0.045 | 0.045 | 0.045 |
Sulphur (S) Max. | 0.030 | 0.030 | 0.030 | 0.030 |
Silicon (Si) Max. | 1.00 | 1.00 | 1.00 | 1.00 |
Chromium (Cr) | 18.0–20.0 | 18.0–20.0 | 18.0–20.0 | 18.0–20.0 |
Nickel (Ni) | 8.0–11.0 | 8.0–11.0 | 8.0–11.0 | 8.0–11.0 |
Molybdenum (Mo) | — | — | — | — |
Nitrogen (N) | — | — | 0.10–0.15 | — |
Iron (Fe) | Bal. | Bal. | Bal. | Bal. |
Other Elements | — | — | — | — |
* Maximum carbon content of 0.04% acceptable for drawn tubes
Alloy | UNS Designation | Werkstoff NR. | Specifications* |
---|---|---|---|
304 | S30400 | 1.4301 | A269, A/SA249, A/SA312, A632, A/SA688, A270 |
304L | S30403 | 1.4306 | A269, A/SA249, A/SA312, A629, A632, A/SA688, A270 |
304LN | S30453 | 1.4311 | A/SA249, A/SA688 |
304H | S30409 | 1.4948 | A269, A/SA249, A/SA312, A/SA688 |
*Note: The specifications noted including ASTM, ASME, or other applicable authorities are correct at the time of publication. Other specifications may apply for use of these materials in different applications.
Friendly link:
Stainless coils tubing |
Titanium Alloy steel pipes |
U tubes |
Finned tubes |
Ferritic Stainless Steel Pipes |
Duplex Stainless steel pipes |
Austenitic stainless steel pipes |
Nickel Alloy steel pipes |
JIANGSU HAOHUA INDUSTRY GROUP Tel: 0086-512-58220050 Fax:0086-512-58810865 E-mail: sales@haopipe.com Add: No.17,Southeastern Avenue, Economic Development Zone (South Area),Zhangjiagang City, Jiangsu Province, China. |