WELCOME TO HAOHUA
Product
Contact Us

JIANGSU HAOHUA INDUSTRY GROUP
Tel: +86-512-58220050
Fax: +86-512-58810865
E-mail: sales@haopipe.com
MSN:    haopipe@hotmail.com
Skype:  haopipe

Loading...

Incoloy 901 (UNS N09901/Din 1.4898) steel pipes and tubes

Description:

Jiangsu Haohua Industry Group as one of the leading suppliers in China to supply Inconel 625 (UNS N06625/W.Nr.2.4856) staal pipes and tubes for petroleum industry and Heat Exchanger industry and Machining Industry etc.
  • Specification
  • Inquiry Now
Description:
Inconel 625 (UNS N06625/W.Nr.2.4856) staal pipes and tubes 
Incoloy 901 Chemical composition:
Alloy
%
Ni
Cu

Al

Fe
Ti
Co
Mn
S
C
Si
P
Cr Mo B
Incoloy 901

Min.

40.0
 
 
 
2.35
 
 

 

 

 

 

11.0
5.0

0.01

Max.
45.0
0.50
0.35
Balance
3.10
1.0
1.0
0.03
0.10
0.60

0.03

14.0

7.0
0.02

Incoloy 901 Physical properties:
Density
8.14 g/cm3
Melting point
1280-1345¡æ

Incoloy 901 minimum mechanical properties in the room temperature:
Status
Tensile strength
Rm N/mm2
Yield strength
RP0.2N/mm2
Elongation
A5 %
Incoloy 901
1034
689
12
 
Description
A nickel-iron-chromium alloy containing titanium and aluminum for precipitation hardening and molybdenum for solid-solution strengthening. The alloy has high yield strength and creep resistance at temperatures to about 1110°F (600°C). A subtantial iron content enables the alloy to combine high strength with good forging characteristics. Used in gas turbines for discs and shafts. Standard products form is round.

Corrosion Resistance
Alloy 901 has good corrosion resistance to the atmospheres normally found in jet engine operations. It has slightly lower scaling resistance than such alloy as Types 309 and 310 stainless steel.

Workability

Hot Working
Alloy 901 is forged between 2050°F (1121°C) and 1850°F (1010°C), metal temperature. Light hot work may be continued down to 1600°F (871°C) but not below. Metal temperature should not exceed 2050°F (1121°C) during rapid working. Billets should be charged into a hot furnace and heated rapidly through the precipitation hardening range.
 
Weldability
Alloy 901 can be welded by the inert-gas-arc method. It is difficult to weld. All welding should be done in the solution treated condition. Cold worked parts should be re-solution treated before welding. A re-solution treatment is recommended after welding before stabilizing and aging.

Friendly link: Stainless coils tubing | Titanium Alloy steel pipes | U tubes | Finned tubes | Ferritic Stainless Steel Pipes | Duplex Stainless steel pipes | Austenitic stainless steel pipes | Nickel Alloy steel pipes |
JIANGSU HAOHUA INDUSTRY GROUP
Tel: 0086-512-58220050 Fax:0086-512-58810865 E-mail: sales@haopipe.com
Add: No.17,Southeastern Avenue, Economic Development Zone (South Area),Zhangjiagang City, Jiangsu Province, China.